![background image](http://html1.mh-extra.com/html/mdc/xt16-hr-family/xt16-hr-family_user-manual-and-manual_1757234035.webp)
34
1300 4X4
2. Fuel pipe blocked or
broken
Check whether the pipe is blocked by impurity and each
connection is intact. if so, please repair or replace it.
3. Fuel pipe blocked
by fuel condensation
If there is fuel condensation, please use fuel which is
suitable for low temperature to replace previous fuel.
4. Blockage in exhaust
pipe
Please clean the exhaust pipe if there is a block.
5. Fault of controller
Replace the controller
10
Flame failure
1. Not enough fuel in
container
Provide enough fuel
2. Fault of ignition
sensor
Troubleshooting or replace it.
Protecting from Mould
Mould is very difficult to clean once a porous surface
is affected. There are several ways you can prevent
the occurrence of mould on your caravan.
Never leave your camper packed away wet. If you
must leave a campsite with wet canvas or a damn
interior, be sure to open and dry out your tent
thoroughly at the very first opportunity when you get
home. Mould can develop in just a couple of days so don’t take the risk.
Summary of Contents for XT16-HR Family
