![background image](http://html1.mh-extra.com/html/mdc/xt12hr-2021/xt12hr-2021_owners-manual_1757223014.webp)
10
Trailer Lights
Plug Type –
12 Pin Flat (Not Negotiable)
Charging Camper/Caravan While Driving
Plug Type – 50 amp Anderson Plug.
Vehicle with or without smart alternator:
The Anderson plug can be connected to the
start battery on the vehicle and should include the following to protect the
start battery.
1. 50 amp relay to stop power supply when vehicle is not running
2.
50 amp fuse or circuit breaker at the battery
Notes: The Projecta IDC25 DC to DC controller
fitted in your MDC trailer is programmed to favour the solar panel input
exclusively until it drops below a threshold voltage input. By providing accessory power to the number 12 pin, the trigger
for the IDC25 will be set off to take power from both the An
derson plug and the solar panels. It will also trigger the
IDC25 to activate the vehicles ECU to make the alternator provide power to fully charge the multiple batteries in your
camper or caravan.
Summary of Contents for XT12HR 2021
