![background image](http://html1.mh-extra.com/html/mdc/xt12hr-2021/xt12hr-2021_owners-manual_1757223013.webp)
9
Vehicle Electrical Requirements
Brake Controller
All MDC campers and caravans require an electric brake controller to be fitted to the tow vehicle by law. There is a
wide
range of controllers available that are suitable.
Correct Vehicle Wiring for MDC Caravans
To comply with national laws on breakaway systems, you must supply a maintenance charge to the battery/batteries that
pow
er the system should it be activated. In all MDC products, the breakaway is powered by the house batteries in the
caravan. For this purpose and Anderson plug connection is fitted to all MDC caravans on the drawbar. Your vehicle will
need to be fitted with
a power supply to a 50 amp Anderson plug near the towbar so the trailer can be connected. The
vehicle only needs to supply power while it is running so a voltage sensitive relay or switching device may be used to
protect the start battery when the car engi
ne is stopped.
Summary of Contents for XT12HR 2021
