9.7 Downloading recorded data
Select the 'Data Logger' tab.
The download page appears:
This display is organized in 6 columns.
The two rightmost columns are used only if you hooked up the optional LM-1 Aux expander
module. See details how to use them in the LM-1 Aux expander manual.
The column from left to right:
1. Input trace color.
The Inputs are color coded on the AUX input cable. The same color is also used in the traces
for the data graph described below.
2. Input
Name
Each Input can be renamed into a meaningful name (like TPS, MAP, MAF, CT, IAT) and so
on.
3. Import
Unit
When checked, the input data is imported as voltage (0-5V) or as sample data (0..1023).
Right click on the check mark to customize the interpretation of the input data. The
customization dialog box allows you to set the unit value to use (for example pound/min for a
MAF sensor), the minimum value the sensor puts out at what voltage and the Maximum
value the sensor puts out. See below:
- 14 -
