ASSEMBLY INSTRUCTIONS
FIG. 1
FIG. 1
FIG. 2
1. Find a clean, level place to begin the assembly of your 4 in 1 Multi-Game Table. This cabinet is very heavy, and
it is recommended to be at least two strong adults to turn the cabinet onto its assembled legs and End Panels.
2. Remove all of the parts from the box and verify that you have all of the listed parts as shown on the Parts list
Page. Carefully cut or tear the four carton corners so that the bottom of the box can serve as your work area.
3. Use the Glue (#39) provided to assemble each Leg (#9 & #10) as shown in FIG.1. Then attach the Leg Bases
(#11) to the bottom of the legs using three Screws (#25) per Leg Base.
Note: Do not place the wrong surface of the Leg Base (#11), the pre-installed Nuts (#43) is visible when you
assemble the screws.
4. After having completed the assembly of the leg bases, screw the Leg Levelers (#13) into the bottom of each leg.
FIG.2
5. Attach the Catcher Boxes (#4) to the End Panels (#3) using four Screws (#25) per Catcher Box.
6. Slide the Lock Pins (#14) into the holes of the End Panels (#3) and screw them using four Screws (#27) per Lock
Pin.
9
9
3
4
39
43
25
25
14
27
14
25
13
11
5
