MD Helicopters CSP-900RMM-2, Servicing And Maintenance

Page: 123 / 2144

CSP − 900RMM − 2 MD Helicopters, Inc.
Rotorcraft Maintenance Manual
Page 201
Revision 34
05-20-50
AIRFRAME SEGMENTED INSPECTION PROGRAM
ROUTINE INSPECTION
Table 201. Routine Inspection
Registration No. Serial No. Helicopter Total Hours
Model Requirement RMM Section Initial
General
900 Fully clean the rotorcraft as necessary before you start inspection. CSP − SPM
20 − 20 − 00
900 During operation in a corrosive environment, make sure there is a
daily rinse of the rotorcraft and a wash of the rotorcraft every 14 days.
CSP − SPM
20 − 20 − 00
900 Ref. applicable manufacturer publications for detailed necessary
inspection of engines, starter/generators, batteries, and all installed
STC and optional equipment.
01 − 00 − 00
900 Examine the aircraft maintenance records for aircraft discrepancies
and correct as necessary.
N/A
900 Examine Integrated Instrument Display System (IIDS) Exceedance
Log Menu and Fault Log Menu. Record and correct discrepancies as
necessary. (NOTE: Logs may be viewed on the IIDS or refer to
GBMC User Guide for complete download and save of IIDS data)
95 − 30 − 00
900 Make sure you comply with component mandatory retirement, refer to
Airworthiness Limitation Schedule and make entries in the Rotorcraft
Log Book.
04 − 00 − 00
900 Make sure you comply with component overhaul, refer to Overhaul
Schedule and make entries in the Rotorcraft Log Book.
05 − 10 − 00
900 Make sure you comply with applicable Special Inspections (Hourly
and Calendar) and make entries in the Rotorcraft Log Book.
05 − 20 − 10
900 Make sure you comply with all applicable Airworthiness Directives
and service bulletins and make entries in the Rotorcraft Log Book.
N/A
900 Make sure all placards and markings are installed. 11 − 00 − 00
900 Remove trim panels, covers, and access panels as necessary. 06 − 00 − 00
Cockpit
900 Do an electrical function check of navigation, strobe, landing,
instrument, utility, and universal lights.
96 − 40 − 00
900 Do an operational test of both fuel shut − offs. 28 − 00 − 00
900 Do an operational test of cross feed valve
(900 CONFIG)
. 28 − 00 − 00
Engine Controls
900 Do a manual engine controls operational test. 76 − 00 − 00