background image

CSP-HMI-3

MD Helicopters, Inc

.

MAINTENANCE MANUAL

[ Main Menu ]

 

[ HMI

3 Book TOC ]

[ Chapter 95 TOC ]

Page 904

Revision 7

95-10-30

The information disclosed herein is proprietary to MD Helicopters, Inc.

Neither this document nor any part hereof may be reproduced or transferred to 

other documents or used or disclosed to others for manufacturing or any other 

purpose except as specifically authorized in writing by MD Helicopters, Inc.

Copyright 

©

 1999

2016 by MD Helicopters, Inc.

Table 901.  Weight and Balance Data

Configuration

Weight

Pounds  (kg)

Arm

inches  (cm)

Moment

in

lb  (kg cm)

369H90044

BSC and 

501

Added

+1.7

(+0.7711)

+43.1

(+109.474)

+73.27

(+844.158)

Removed

0.0

0.0

0.0

Net Change

+1.7

(+0.7711)

+43.1

(+109.474)

+73.27

(+844.158)

369H90044

503

Added

+1.6

(+0.7257)

+43.1

(+109.474)

+68.96

(+794.50)

Removed

0.0

0.0

0.0

Net Change

+1.6

(+0.7257)

+43.1

(+109.474)

+68.96

(+794.50)

369D294508

BSC, 

701, 

709, 

711, 

713

Added

+1.9

(+0.8618)

+46.5

(+118.11)

+88.35

(+1017.898)

Removed

0.0

0.0

0.0

Net Change

+1.9

(+0.8618)

+46.5

(+118.11)

+88.35

(+1017.898)

369D294508

501

Added

+1.6

(+0.7257)

+43.1

(+109.474)

+68.96

(+794.50)

Removed

0.0

0.0

0.0

Net Change

+1.6

(+0.7257)

+43.1

(+109.474)

+68.96

(+794.50)

Summary of Contents for 369-500



















































































































































































































































































































































































































































































































































































































































































































































Reviews: