MD Helicopters 369-500, Maintenance Instructions Manual

Page: 110 / 722

CSP-HMI-3
MD Helicopters, Inc
.
MAINTENANCE MANUAL
[ Main Menu ]
[ HMI − 3 Book TOC ]
[ Chapter 95 TOC ]
Page 204
Revision 7
95-10-00
The information disclosed herein is proprietary to MD Helicopters, Inc.
Neither this document nor any part hereof may be reproduced or transferred to
other documents or used or disclosed to others for manufacturing or any other
purpose except as specifically authorized in writing by MD Helicopters, Inc.
Copyright
©
1999 − 2016 by MD Helicopters, Inc.
DRAIN VALVE
GROMMET
STATION 127.00
DRAIN VALVE
ALTIMETER
AIRSPEED
INDICATOR
COVER PANEL
NYLON CROSSOVER TUBE
(NOTE 1)
DRAIN VALVE
STATIC PRESSURE
TUBE
CANOPY FRAME
INSTRUMENT PANEL
(TYPICAL)
PITOT PRESSURE
NYLON TUBE
NYLON STRAP
TORQUE GAGE
PRESSURE LINE
LINE ATTACHMENT
(TYPICAL)
INST PANEL LOWER
SUPPORT STRUCTURE
GROMMET
DRAIN HOLE
PITOT TUBE ASSEMBLY
G95-1001A
NOTES:
1. MINIMUM BEND RADIUS OF 1.00 IN. (2.54 CM)
REQUIRED FOR ALL TUBES.
2. TUBE BONDED TO FAIRING WITH ADHESIVE.
TUBE END MUST BE FLUSH WITH OUTSIDE
SURFACE.
SINGLE STATIC
PRESSURE PORT
(NOTE 2)
STATIC PRESSURE TUBE
Figure 201. Pitot − Static System (369D)