McQuay MWM 007F, Manual

Page: 3 / 108

F FF
FFea
ea
ea ea
eatur tur
tur tur
tures es
es es
es
1
• Easy Installation
- The wall mounted fan coil unit is easily installed because of its compact size, slimness and light weight.
- Slim and short outdoor unit can be easily installed even in a narrow balcony and passageway and yet
have a stable profile.
• Space Saving
- No space is required on either floor or ceiling. This newly developed super slim design for wall mounting
maximizes floor space usage and enhances ceiling appearance where ceilings are low.
• Quient Operation
- Cooling comfort is improved by whisper-quiet operation which is achieved by a tangential fan.
• Excellent Air Distribution
- Air discharge direction can be adjusted in four directions, manually or automatically by using LCD
remote control.
- The new double louver design with automatic air swing function fully optimizes the room comfort by
distributing the air evenly to the room.
- The unique skew fan design with larger diameter creates better air flow to the operating environment.
• Facilitated Maintenance Ensured
- The new design of air discharge housing whereby the fan blower can be easily accessed by just loosing
two screws on the unit to provides a flexible, faster and easier way to clean up the fan blower and
ionizer.
- Maintenance is easy for electrical components, piping and wiring as these are all easily accessible by
merely removing front plastic panel.
• Wireless Remote Control
- The compact LCD transmitter is able to operate the air conditioner unit within the distance of 9 meters.
- Fan motor speed can be set at low/medium/high or automatic.
- Sleep mode auto control will gradually increase or decrease the setting temperature to provide a
comfortable surrounding for sleeping.
- Air flow direction can be controlled automatically.
- Room temperature is controlled by electronic thermostat.
- The unit can be present to on and off automatically for maximum if 15 hour by using timer on/off
• Slin Fin
- The unique Hydrophilic slit fin has greatly improved the air flow and the contact surfaces with the air
thus to boost the cooling capacity.