Product Manual AGR-3
AGR 070A through 100A
53
Product Specification, AGR-AM
SECTION 15XXX
AIR-COOLED RECIPROCATING CHILLERS
WITH REMOTE EVAPORATORS
AGR 070AM - AGR 100AM
PART 1 - GENERAL
1.01
SUMMARY
Section includes design, performance criteria, refrigerants, controls, and installation
requirements for air-cooled reciprocating compressor chillers.
1.02
REFERENCES
Comply with applicable Standards/Codes of ANSI/ASHRAE 15, ETL, cETL, ASME Section
VIII, NEC, ASHRAE Standard 90.1, and OSHA as adopted by the State.
1.03
SUBMITTALS
A.
Submit shop drawings and product data in accordance with the specifications.
B.
Submittals shall include the following:
1.
Dimensioned plan and elevation view drawings, required clearances, and
location of all field connections.
2.
Summary of all auxiliary utility requirements such as: electricity, water,
compressed air, etc. Summary shall indicate quality and quantity of each
required utility.
3.
Single line schematic drawing of the power field hookup requirements,
indicating all items which are furnished.
4.
Schematic diagram of control system indicating points for field
interface/connection.
5.
Diagram shall fully delineate field and factory wiring.
6.
Installation manuals.
1.04
QUALITY ASSURANCE
A.
Qualifications: Equipment manufacturer must specialize in the manufacture of the
products specified and have five years experience with the equipment and refrigerant
offered.
B.
Regulatory Requirements: Comply with the codes and standards specified.
C
Chiller manufacturer plant must be ISO9002 Registered.