Programming (continued)
• Set time is displayed
9. Press the or button to change set time.
10. Press the button to advance to the next screen.
Note:
Transitions required after 11:59 PM must be programmed in the next
day’s MORN period.
• Heat temperature is displayed (50°F to 90°F)
11. Press the or button to adjust heat set temperature.
12. Press the button to advance to the next screen.
• Cool temperature is displayed (45°F to 85°F)
13. Press the or button to adjust cool set temperature.
14. Press the button to advance to the next screen.
• Programmable fan is displayed
15. Press the or button to turn ON/OFF continuous indoor fan for that period.
16. Press the button to advance to the next screen.
Repeat steps 1-16 to program each day of the week individually or use the
Simpleset
®
feature (see Page 17) to program every day the same as Monday.
Press the button for 5 seconds to exit programming and return to the OFF mode.
Press the button to select the correct operating mode.
Press the button to enter and exit program mode.