McNeilus HD Rear Loader, Operator'S Manual, Page: 57 / 132

© 2008 McNeilus Truck and Manufacturing, Inc.
Rear Loader
43
10
5
5
2
15
10
15
2
2
2
3
3
5
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Figure 10
1.2 Outside Rear Controls
These controls are normally located on the curb side of the
vehicle near the rear of the tailgate (Figure 11). Your Rear
Loader may also be ordered with outside controls on the
street side. The operator must follow ANSI Z245.1 packing
and material handling controls standard, which includes
directives that all personnel are clear of the hopper or lifting
mechanism (if equipped) before starting any packing cycle or
material lifting or handling. The operator must remain at the
controls during the packing cycle and be ready to stop the
packing cycle or lifting operation if there is a potential point of
operation hazard.
NOTE
The function of the levers may vary on your
truck based on the options ordered. Be
familiar with the location and functions of the
controls on your Packer before operating.
Operation