McNeilus HD Rear Loader, Operator'S Manual, Page: 16 / 132

© 2008 McNeilus Truck and Manufacturing, Inc.
Rear Loader
2
Safety
1.1 Battery Disconnect Switch
If your vehicle is equipped with a BATTERY DISCONNECT
switch, it may be located near the battery box. Use the battery
disconnect switch when performing any maintenance so the
vehicle cannot be accidentally started.
1. Turn the battery disconnect switch (Figure 1, Item 1)
counterclockwise so the hole on the switch aligns with
the hole in the bracket (Figure 1, Item 2).
2. Install the safety lockout device ring (Figure 2, Item 1)
through the holes on the battery disconnect switch and
the bracket.
3. Install a padlock (Figure 2, Item 2) onto the safety
lockout device ring, lock it, and put the key in your
pocket. If more than one person is working on the
vehicle, each person must install their own padlock.
ON
1
2
ON
DAN
GER
This energy source ha
s
Unautho
rized removal of
thi
s lo ck/ tag
m ay
res ult
in immediate disch
arg
e.
Rem
ark
s:
been
LOCKED OUT!
1
2
Figure 1
Figure 2