McNeilus HD Rear Loader, Operator'S Manual, Page: 113 / 132

© 2008 McNeilus Truck and Manufacturing, Inc.
Rear Loader
99
Preventive Maintenance
3.10 Adding Hydraulic Oil
3.10.1 Standard Hydraulic System
Check the oil level with all hydraulic cylinders in their fully
RETRACTED positions.
• Ejector in HOME or RETRACTED position
• Tailgate in DOWN position
• Slide panel completely UP
• Sweep panel completely RAISED
• Optional reeving cylinder RETRACTED
• Optional tipper bar LOWERED
NOTE
If it is necessary to add hydraulic oil often
or in large quantites, inspect the hydraulic
system for leaks and repair before
operating the refuse vehicle.
NOTE
When adding hydraulic oil, take every
precaution to prevent contaminants from
entering the hydraulic system. Cleanliness is
extremely important when working with
hydraulics.
To add hydraulic oil, retract all cylinders, open the filler cap
( Figure 57, Item 1) or remove the breather filter (Figure 57 ,
Item 1) as equipped and add oil as necessary.
1
2
Figure 57