background image

© 2008 McNeilus Truck and Manufacturing, Inc.

Rear Loader

22

Safety

WARNING

Hydraulic hoses and tubing must be

inspected on a daily basis for leaks, cuts,

abrasions, damage, aging, improper 

clearance, and along the frame for hidden 

damage. If you find hoses with any 

such adverse conditions or damage, they 

must be replaced before the vehicle is

returned to service! Failure to properly 

inspect and maintain your vehicle may 

result in serious personal injury or death. 

WARNING

Hydraulic systems are hot. DO NOT TOUCH!

Serious personal injury or death may result

from hot oil. When you have completed 

working on the hydraulic systems, 

thoroughly clean any spilled oil from the 

equipment. Do not spill any hydraulic fluid

on the ground. Clean any hydraulic fluid from 

your skin as soon as you have completed

your maintenance and repairs. Dispose of

used oil and filters as required by law.

WARNING

The hydraulic cylinders can be holding a 

function in a certain position when the 

engine is OFF. An example of this would be

a function being held in the lift or partial lift

position by the cylinders. If a hydraulic line

is removed or the hydraulic circuits or

controls are being worked on, gravity may 

allow the function being held in position to

drop. All workers and personnel must 

remain clear of these areas when working

on or operating the McNeilus equipment.

Block and secure all applicable devices and

functions before beginning work or 

operation. Failure to comply with this can

result in serious injury or death. 

Summary of Contents for HD Rear Loader





































































































































Reviews: