mcmurdo Smartfind M10, User Manual

Page: 19 / 86

19
1 System Overview
1.1 Product Description
The McMurdo Smartfind M10 AIS Class B Transponder is perfect for
smaller vessels, where the complexity of a Class A Transponder is not
necessary. It transmits the vessels dynamic and static data in a typical 7
NM range as well as receives AIS targets typically within 20 NM around the
boat. Using the built-in GPS receiver, the Smartfind M10 determines
position, speed and course, and once this is combined with other
navigational information, it is automatically transmitted without any user
interaction. When received by other vessels and coast stations, the data
built up will provide a live graphical display of traffic in the area. The
McMurdo M10 has been engineered for flawless integration with navigation
systems, and supports NMEA2000 and NMEA0183 communications, and
its output meets IEC 62287 and related standards. The M10 also features
USB connectivity and an optional WI-FI interface (M10W). The SD card
slot in the Smartfind M10, can be quickly and easily used as a data
recorder, enabling the capture of all messages - to assist in system and
safety monitoring, including incident investigation. The recorded data is
logged and stored on the SD card when fitted
. A ‘Silent’ mode allows the
user to stop the broadcast of static and dynamic information on occasions
where either privacy or security is required.
Smartfind M10
series supports “Dual GPS Backup” to enable GPS input
from both NMEA 2000 and NMEA 0183. This feature actively backs up
your external GPS antenna to ensure the positioning and transmission of
your AIS transponder.