MCM Electronics dvr User Manual Download

Page: 126 / 151

4/8/16Ch H.264 Network DVR Series- Ver2.2

114

8.1 PC Viewer Operation

PC Viewer will help you review and play back the stored video data on the Windows
platform computer.

NOTE

The PC Viewer works best with a display resolution of above
800x600. Please set your PC monitor’s resolution to a value
higher than this.

8.1.1 Installation

Please refer to the attached CD. Run “PC Viewer” to playback the DVR video data.

Windows OS platform requires that the application be run as the administrator user.

NOTE

It is suggested that you install the DirectX software. It provides a
smoother display of the PC Viewer video on the computer.

8.1.2 Overview

The PC Viewer supports remote viewing and control for a maximum 4 DVR
connections.

Click on the PC desktop icon “

PC Viewer” to execute the PC Viewer on the

Windows-based computer. The primary window for application will appear as
follows:

Summary of Contents for dvr
























































































































































Search results

Summary of Contents for dvr

Reviews:

Related manuals for dvr

Brands by name

Popular brands

MCM Electronics dvr, User Manual

Search results

Summary of Contents for dvr

Reviews:

Related manuals for dvr

Brands by name

Popular brands