McLaren SUPER SERIES, Owner'S Handbook Manual

Page: 90 / 268

Driving Controls
Driving Safety Systems
2.34
Reactivating electronic stability control
(ESC)
When electronic stability control is
reactivated, the electronic stability control
OFF warning light on the Driver Display
extinguishes.
NOTE: Electronic stability control is
automatically reactivated when the
ignition is next switched off and on
again.
Reactivation Procedure
Perform any of the following to reactivate
electronic stability control:
•
Press the ESC OFF button briefly, the
light on the button will be extinguished.
•
Change the mode on the handling
control to Comfort.
•
Switch the ignition off and then switch
on again.
Airbrake
WARNING: The driver is responsible
for ensuring that no persons, or any
part of their body can be trapped
during Airbrake movement.
The Airbrake is located at the rear of your
McLaren and moves dynamically, dependent
on the vehicle's requirements. A self-test
facility that initiates after every full ignition
on/off cycle.
NOTE: The Airbrake uses hydraulic
pressure and will only operate with
the engine running.
NOTE: The Airbrake system is
automatically deactivated at low
transmission oil temperatures. A
warning message will appear on the
Driver Display if operation of the
Airbrake is selected. The Airbrake
system will become active when the
transmission oil temperature rises.
p14.book Page 34 Tuesday, October 24, 2017 11:15 AM