McLaren SUPER SERIES, Owner'S Handbook Manual

Page: 185 / 268

Comfort and Convenience
Vehicle Tracking
5.13
Remote keypad (Belgium only)
Your keypad is used to enter and transmit a
code to the vehicle tracking service, in order
to activate your tracker system.
Once you have received the code, sent to
your mobile phone, follow the procedure
described.
You will need to enter this code every time
that you use your vehicle.
If you wish to add or remove a keypad,
contact your McLaren retailer.
NOTE: Store your remote keypad away
from key fobs when the vehicle is not
in use to reduce the risk of the keypad
being taken in the event of key fob
theft.
Do not leave your remote keypad or
certificate of tracker installation in the
vehicle.
Entering a code
1. Press the centre button, the LED will
start flashing.
2. Enter the code supplied to your mobile
phone, and press the centre button
again.
3. The LED will stop flashing once the
code is validated.
4. The tracker is now disarmed.
NOTE: You will need to enter this code
every time that you use your vehicle.
In the event of a theft
1. If you discover the vehicle has been
stolen, call the vehicle tracking centre in
your home country,
or
if your vehicle is supplied with an
automatic driver recognition card and
the vehicle is moved without this, the
vehicle tracking centre will initially send
a text message to you to verify the
vehicle movement. In addition to this,
the vehicle tracking centre will attempt
to contact you using your mobile phone
number then your home or office
number provided you supplied them at
the time of vehicle collection.
2. The vehicle tracking centre will not
contact the police until they have
spoken to you. Once you have
confirmed the theft, they will
commence the vehicle recovery
procedure.
3. The vehicle tracking centre will ask you
to contact the police to report the theft
and call back with a police incident
number. Receipt of an alert does not
p14.book Page 13 Tuesday, October 24, 2017 11:15 AM