McLaren coupe series Owner'S Handbook Manual Download Page 19 | Manualshive

Page: 19 / 272

background image

Before You Drive

Opening and Closing

1.7

Opening a door

1. Press the button

(1)

firmly to unlock

and unlatch the door.

NOTE: Ensure the key is within a 3 feet
11 inches (1.2 meters) range of the
door sensors when using the keyless
entry feature.

WARNING: Always stand to the rear
of the door before opening it, as the
opening action may cause injury.
The speed that the door opens will
be affected by ambient
temperature.

NOTE: Because the door opens
outwards and then upwards, ensure
sufficient side and overhead clearance
before opening a door, see Vehicle
dimensions, page 6.8.

2. If keyless entry is used, the front, rear

and side turn signals (market specific)
will flash twice, and the anti-theft
alarm system will be deactivated.

3. The door latch will then release,

allowing the door to be partially raised
before it automatically swings
outwards and upwards. The mirrors will
unfold if folded.

NOTE: When the door is opened, the
window will lower slightly. It will raise
to the closed position once the door is
shut. If the window does not lower, for
example, due to a discharged battery
or freezing temperatures, take care
when opening and closing the door. Do
not force the door during opening or
closing, as this could lead to the door
seals or window becoming damaged.

NOTE: A sustained long press and hold
on the unlock button will
automatically lower the windows. The

windows will continue to lower until
the unlock button is released or the
windows are fully lowered.

NOTE: If the vehicle is unlocked using
the key fob but the doors or luggage
compartment are not opened, the
vehicle will relock after 30 seconds.

Locking a door

1. Close the door. See Closing a door,

p13.book Page 7 Wednesday, April 26, 2017 9:22 PM

«
...
17
18
19
20
21
...
»

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

Brand: DEFA Pages: 7

Brand: Prorack Pages: 15

Brand: Mazda Pages: 720

01 29 9 416 497

Brand: BMW Pages: 5

Brand: Yakima Pages: 13

Brand: Menabo Pages: 11

Brand: AC Schnitzer Pages: 16

Brand: Cadillac Pages: 402

Brand: Cobra Pages: 2

Brand: Draw tite Pages: 4

Brand: EFILive Pages: 25

Brand: Discount Car Stereo Pages: 8

Brand: Aries Pages: 3

Brand: Edelbrock Pages: 2

Brand: Hudson Pages: 77

Brand: Menabo Pages: 8

Brand: Mercedes-Benz Pages: 493

Brand: Safe Fleet Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands