McLaren coupe series Owner'S Handbook Manual Download Page 185 | Manualshive

Page: 185 / 272

background image

Comfort and Convenience

Interior Features

4.15

WARNING: Do not use the stowage
net to transport any heavy, sharp-
edged or breakable objects.
Occupants could be injured by
objects being thrown around during
sharp braking, a sudden change of
direction or an accident.

Passenger’s footwell stowage net

There is a stowage net in the passenger’s
footwell for storing small items.

NOTE: Maximum item sizes for the
passenger’s stowage net are as
follows:

•

Maximum item size 1 - 9.84 in Height x
7.87 in Width x 0.79 in Depth.

•

Maximum item size 2 - 3.94 in Height x
7.87 in Width x Depth 2.76 in.

Passenger’s footwell stowage net maximum
item size 1 - 9.84 in Height (1) x 7.87 in
Width (2) x 0.79 in Depth (3).

Passenger’s footwell stowage net maximum
item size 2 - 3.94 in Height (1) x 7.87 in
Width (2) x Depth 2.76 in (3).

WARNING: Do not place items in the
passenger’s footwell stowage net
that exceed the dimensions stated
previously. It could lead to personal
injury or prevent the occupant
restraint system from performing
correctly.

WARNING: Do not use the stowage
net to transport any heavy, sharp-
edged or breakable objects.
Occupants could be injured by

p13.book Page 15 Wednesday, April 26, 2017 9:22 PM

«
...
183
184
185
186
187
...
»

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

Brand: Yakima Pages: 8

Brand: Metra Electronics Pages: 2

Brand: Kia Pages: 54

Brand: Hella Pages: 21

Ford 4” UNI-CAM

Brand: Nav TV Pages: 6

2007 9-3 Remote Starter

Brand: Saab Pages: 304

Brand: Metra Electronics Pages: 5

Brand: Renkforce Pages: 4

Akerstroms Tx700

Brand: LXE Pages: 146

Brand: Fab Fours Pages: 21

Brand: PUTCO Pages: 3

Brand: Xpresskit Pages: 12

Performer-Plus 2172

Brand: Edelbrock Pages: 4

Brand: Phonocar Pages: 28

Brand: Edelbrock Pages: 4

Brand: Rhino-Rack Pages: 2

Brand: CITROEN Pages: 86

Brand: Flash Cover Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands