McLaren ARTURA, Owner'S Handbook Manual

Page: 79 / 326

Handling control
The handling control switch affects the Proactive
Damping Control system.
Selecting a mode
NOTE: When the vehicle is switched on,
it starts in Comfort mode.
1. Press up on the Handling paddle to toggle
into Sport or Track mode.
2. To toggle back down into Sport or Comfort
mode, press down on the Handling paddle.
Modes
The information displayed on the Driver Display
will change dependent on the handling mode
selected. See Display window, page 3.19.
The mode selected will remain active, until the
selection is changed or the ignition is switched
off.
The next time the ignition is switched on, the
handling mode will return to Comfort mode.
The previously used handling and powertrain
modes can be quickly restored by pressing and
holding both the down Handling and Powertrain
paddles when the ignition in on.
NOTE: If all the following conditions are
not met when the selection is made, the
mode will not be implemented until
they are met:
• No fault conditions existing
• No vehicle dynamic or stability
interventions activated, e.g. electronic
stability control
NOTE: In Track handling mode, the
electronic stability control system is still
in operation. For further information,
see Electronic stability control (ESC),
page 2.30.
Comfort
Suspension at its softest setting, offers a
compliant ride while maintaining good body
control through corners.
Sport
Suspension is stiffer, giving a firmer ride coupled
with enhanced handling characteristics.
2.23
Driving Controls
Handling and Powertrain Controls
R