McLaren ARTURA, Owner'S Handbook Manual

Page: 64 / 326

Parking brake operation
To engage the parking brake, pull the switch
outwards, the red parking brake applied status
light on the Driver Display illuminates.
NOTE: The parking brake on your vehicle
is electronic and only a light application
of the switch is required to engage or
disengage the parking brake.
To disengage the parking brake, keep the brake
pedal depressed and push the parking brake
switch inwards, the red parking brake applied
status light on the Driver Display extinguishes.
WARNING: If the parking brake is
manually released, the vehicle may
start to move.
NOTE: If the parking brake is not
manually released, it will automatically
release as the vehicle is driven off
forward, or in reverse as long as the
following conditions are met:
• Driver’s door is closed
• Driver’s seat belt is buckled
NOTE: If the parking brake is not
manually applied it will automatically
apply when the engine is switched off.
NOTE: It is only possible to disengage
the parking brake with the ignition on.
The parking brake can be applied in all
ignition states, including vehicle asleep.
NOTE: In the event of total footbrake
failure, the parking brake can be applied
when the vehicle is moving to slow the
vehicle.
NOTE: If the parking brake cannot be
disengaged due to electrical failure or
battery discharge, see How to recover
the vehicle with a discharged 12V or HV
battery, page 6.17 and contact your
McLaren retailer.
NOTE: If the parking brake cannot be
engaged due to electrical failure or
battery discharge, use the supplied
chock to ensure the vehicle remains
stationary. See Wheel chock, page 6.16
and How to recover the vehicle with a
discharged 12V or HV battery, page
6.17 and contact your McLaren retailer.
2.08
Driving Controls
Starting and Driving
L