McLaren ARTURA, Owner'S Handbook Manual

Page: 60 / 326

Vehicle electrical status
The vehicle will implement one of the following
statuses.
NOTE: The engine can be started from
any of the following states, except
Locked. If the vehicle is in Sleep mode,
the START/STOP button will need to be
pressed for more than 2 seconds.
NOTE: If the vehicle detects the battery
charge is getting too low, it will adopt
the Awake mode to conserve energy.
Ignition will be prohibited, but Crank will
still be available. This is to allow the
engine to be started so that High
Voltage (HV) battery recharging can
commence.
Locked
Vehicle is locked in low power mode.
Sleep
Vehicle is unlocked in low power mode.
Awake
Door is opened or START/STOP button pressed,
when the vehicle is in Sleep mode.
The welcome screen shows the time, outside
temperature, odometer reading, 12V battery
level, HV battery level and fuel gauge, selected
powertrain and handling modes, and comfort
entry on the Driver Display.
NOTE: Comfort entry will only be
displayed on the welcome screen if it
has been enabled in the settings, see
Comfort Entry/Exit, page 4.11.
If the HV battery is currently being charged, the
charging status will also be shown.
If there is no further activity after 60 seconds,
the vehicle will return to the Sleep mode.
Ignition
START/STOP button is pressed, when the
vehicle is in Awake mode.
Windows and heater/air conditioning controls
can be operated. Driver Display menus and
McLaren Infotainment System (MIS) are available.
NOTE: There is no timeout with ignition
on. Be aware that the battery could
become discharged.
Engine start
See Starting/stopping the vehicle, page 2.09.
2.04
Driving Controls
Starting and Driving
L