background image

4

Power Control Connectors

The MR89 Power Control Input/Output Jacks receive/

send Power On/Off Signals 

when connected to other 

McIntosh Components. A 1/8 

inch stereo mini phone plug 

is used for connection to the 

Power Control Input/Output on 

the MR89.

Note: The Data and Power Control Connecting Cable 

is available from the McIntosh Parts Department: 

Data and Power Control Cable Part No. 170-202

Six foot, shielded 2 conductor, with 1/8 inch stereo 

mini phone plugs on each end.

Data and IR Input Port Connectors

The MR89 Data In Port receives Remote Control 

Signals. A 1/8 inch stereo mini phone plug is used for 

connection. The IR Port also use a 1/8 inch stereo mini 

phone plug and allow the connection of other brand IR 

Receivers to the MR89.

Data

Signal

N/C

Data

Ground

IR Data

Control

Ground

N/C

RAA2 Connectors

Pin No.  Wire Color 

Pin No.  Wire Color

  1.   White/Orange 

6.   Green

  2.   Orange 

7.   White/Brown

  3.   White/Green  

8.   Brown

  4.   Blue

  5.   White/Blue 

*Cable outer shield

Pin 1

Pin 1

Pin 8

Pin 8

*Cable outer shield

Note: The RAA2 Connecting Cable is available from the 

McIntosh Parts Department:

RAA2 Antenna Cable Part No. 171844

Power

Control

 Ground

Lighting

Control

Twenty foot, shielded 8 conductor, with a shielded RJ45 

connector on each end.

Introduction

The MR89 AM/FM Tuner is an elegant instrument 

for superb reception from Radio Stations. The MR89 

uses the latest in technology for the best sound quality, 

along with a two-line display for convenient opera-

tion and comprehensive station information. Meters 

provide real time insight into the audio program.

Performance Features

• Special FM RF Circuitry 

The MR89 RF Circuitry receives strong local FM 

Station Signals without distortion and receives 

even the weakest of FM Signals with low noise.

• RAA2 External AM Antenna 

The RAA2 External AM Antenna allows place-

ment of the AM Antenna for the best reception.

• Preset Stations and Permanent Memory 

The MR89 Tuner stores up to twenty AM and FM 

Station presets and they are retained in Permanent 

Memory.

• Balanced Outputs 

The Balanced Outputs allow connection of the 

MR89 to a Preamplifier using long cable lengths 

without a loss in sound quality.

• Digital Audio Outputs 

There are Coaxial and Optical Digital Outputs for 

external decoding of the PCM Signal.

• Multifunction Fluorescent Display 

The Front Panel Display facilitates tuning, setup, 

and provides signal information while a full comple-

ment of RS232 control with metadata support makes 

the MR89 the go-to multi-format broadcast audio 

source for today’s whole-house systems.

• Information Service 

The MR89 will indicate various text information 

such as Station Call Sign, Music Genre, Artist 

Name and Song Title when transmitted by the 

Radio Station.

• Remote Control with External Sensor Input 

The Remote Control provides control of the MR89 

operating functions and other McIntosh Source 

Components. Enjoy your McIntosh System from 

other rooms in your home by connecting external 

sensors.

• Power and Lighting Control Input 

Power control inputs allow the MR89 to receive 

power on/off signals from other McIntosh compo

-

nents. While powered, the MR89 meter lighting 

can be enabled or disabled by other components.

• Power Control Output 

A Power Control Output connection for conve-

nient Turn-On of McIntosh Power Components 

and Accessories is included. The Power Control 

Output follows the state of the front-panel standby 

pushbutton, the power control input, and the 

RS-232 and IR power commands.

• Special Power Supply 

Fully regulated Power Supplies and a special 

R-Core Power Transformer ensure stable noise 

free operation even though the power line varies.

• Gold Plated Connectors  

The MR89 Digital and Analog Audio Connectors 

are gold plated for superior corrosion resistance 

and high electrical conductivity.

• Solid State Front Panel Illumination 

The even Illumination of the Front Panel and 

meters is accomplished by extra long life Light 

Emitting Diodes (LEDs).

• Glass Front Panel and Super Mirror Chassis Finish 

The famous McIntosh Illuminated Glass Front 

Panel and the Stainless Steel Chassis with Super 

Mirror Finish ensures the pristine beauty of the 

MR89 will be retained for many years.

Summary of Contents for MR89

























Reviews: