McHale
Fusion Vario
Baler & Wrapper
19
Danger Zone
The ‘Danger Zone’ is the area around the rotating dispensers (approx.
2 metres radius from the rotating centre axis) & (a minimum of 5 metres) at
the back of the machine to allow for safe bale discharge.
It is the operator’s responsibility to ensure that there is no person in the
‘Danger Zone’ while operating the machine, especially during start up.
Before repair or reassembly
Safe lifting gear of sufficient capacity must be used for machine assembly. All
chains and slings used must be in good condition.
Stop switch A located on back left hand
corner of back left panel
Stop switch B located on
right hand side inside front right panel
NOTE: ‘Danger Zone’ can vary in size
The operator must be aware of the ‘Danger Zone’ which can vary in size,
depending on operating conditions, i.e. hilly terrain.
A
B
