manualshive.com logo in svg

McGREGOR MCR2433, Original Instruction Manual, Page: 33 / 34

Share
Download
McGREGOR MCR2433 Original Instruction Manual Download Page 33

  

33

  

Customer Helpline 

0345 605 2063

Troubleshooting

General Troubleshooting (continued)

Fault

Possible Cause

Solution

Area of cut (battery duration) 

not large enough 

Height of cut too low

Increase height of cut and 

walk slower

Grass too high

Increase height of cut and 

walk slower

Grass wet or damp

Wait until grass is dry and walk 

slower

Grass is dense

Increase height of cut, walk 

slower and cut more frequently

Cutting blade not rotating 

while garden product 

switched on

Cutting blade obstructed

Switch off garden product 

Clear obstruction (always wear 

gardening gloves)

Blade nut/bolt loose

Tighten blade nut/bolt (17 Nm)

Excessive vibrations/noise

Blade nut/bolt loose

Tighten blade nut/bolt (17 Nm)

Cutting blade damaged

Replace the blade

No charging procedure 

possible 

Battery contacts 

contaminated

Clean the battery contacts 

(e.g. by inserting and 

removing the battery several 

times) or replace the battery

The battery is defective, due 

to a disconnection in the 

battery (individual cells)

Replace the battery

The charge control LED do 

not light up after inserting the 

mains plug into the socket

Mains plug of battery charger 

not plugged in (properly)

Insert mains plug (fully) into 

the socket outlet

Socket outlet, mains cable or 

battery charger defective

Check the mains voltage 

and if necessary, have the 

battery charger checked by an 

authorized customer service 

station

The Green LED flashing 

rapidly on the charger

Battery in a low voltage 

status and needs a recovery 

charge

Leave the battery charging for 

an extra 30mins, the battery 

will awaken and the charger 

will complete charging

No Charging possible 

flashing red LED

Charging paused - Battery 

too hot or too cold

Allow battery to rest at room 

temperature until charging can 

resume

Summary of Contents for MCR2433



































Reviews:

No comments