Hydr
aulic
7 - 8
Hydraulic
EP800AD (Acrobat™ HPU)
Change Hydraulic Fluid and Filter
This HPU is equipped with a 3 micron cartridge filter with a bypass
indicator on the top of the unit. If the indicator is activated, the filter
needs to be changed otherwise the filter should be replaced every 500
hours.
Ensure the HPU is unplugged from the power source and use a wrench
to remove the bowl from the filter housing. Remove the old filter
cartridge and replace with a new filter cartridge. Install the bowl on the
filter housing.
The hydraulic fluid should be replaced every year.
Fill the reservoir from a clean container. Refer to the
section of this manual for hydraulic fluid recommendations.
