2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL
2-54
FRQILJ]RQLQJVKRZ$FWLYH
6\QWD[
showActive
3XUSRVH
This command shows the zoning configuration saved on the fabric.
3DUDPHWHUV
This command has no parameters.
&RPPDQG([DPSOH
Root> config zoning showActive
2XWSXW
The zoning configuration data is displayed as a table that includes
the following properties.
2XWSXW([DPSOH
The output from the config.zoning.showActive command displays as
follows.
Active Zone Set
Default Zone Enabled: False
ZoneSet: TheUltimateZoneSet
Zone: TheUltimateZone
ZoneMember: Domain 10, Port 6
ZoneMember: Domain 15, Port 2
ZoneMember: Domain 2, Port 63
ZoneMember: 10:00:00:00:C9:22:9B:64
ZoneMember: 10:00:00:00:C9:22:9B:BD
Zone: TheNotSoUltimateZone
ZoneMember: 10:00:00:00:C9:22:9B:AB
ZoneMember: 10:00:00:00:C9:22:9B:C6
ZoneMember: 10:00:00:00:C9:22:9B:AB
Zone: TheNotUltimateAtAllZone
ZoneMember: Domain 2, Port 63
Active ZoneSet
The enabled status, name, and member zones of
the zone set.
Summary of Contents for OPENconnectors
Page 8: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Tables viii...
Page 14: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Preface xiv...
Page 164: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Glossary g 14...