McDATA OPENconnectors, Command Line Interface Manual

Page: 62 / 170

2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300 2-30
FRQILJVQPSDXWK7UDSV
6\QWD[
authTraps enabledState
3XUSRVH
This command enables or disables the authorization traps to be sent
to SNMP management stations when unauthorized stations try to
access SNMP information from the director or switch.
3DUDPHWHUV
This command has one parameter.
&RPPDQG([DPSOHV
Root> config snmp authTraps true
Root> config snmp authTraps 1
FRQILJVQPSGHOHWH&RPPXQLW\
6\QWD[
deleteCommunity commIndex
3XUSRVH
This command entirely deletes a community from the SNMP.
3DUDPHWHUV
This command has one parameter.
&RPPDQG([DPSOH
Root> config snmp deleteCommunity 5
enabledState Specifies whether the authorization traps are
enabled. Valid values are true and false. Boolean
1 and 0 may be substituted as values.
commIndex Specifies the community to be deleted. Valid
values are integers in the range 1–6. This value
was set in the commIndex parameter of the
config.snmp.addCommunity command. Valid
values are integers in the range 1–6.