McDATA OPENconnectors, Command Line Interface Manual

Page: 37 / 170

CLI Commands
config
2
2-5
FRQILJIHDWXUHVVKRZ
6\QWD[
show
3XUSRVH
This command shows the product feature information configured for
this switch.
3DUDPHWHUV
This command has no parameters.
&RPPDQG([DPSOH
Root> config features show
2XWSXW
The product feature data is displayed as a table that includes the
following property.
2XWSXW([DPSOH
The output from the config.features.show command displays as
follows.
Installed Feature Set Feature State
------------------------------ ------------------ -----
Open Systems Management Server OSMS Enabled
Flex Ports 8 Flex Ports Enabled
SANtegrity Fabric Binding Active
SANtegrity Switch Binding Enabled
SANtegrity Enterprise Fabrics Active
Installed Feature
Set The feature set installed using a feature key.
Only installed keys are displayed.
Feature Individual features within each set. In many
cases, there is only one feature within each
feature set.
State The state of the individual feature. Fabric-wide
features are displayed as Active/Inactive.
Switch-centric features are displayed as
Enabled/Disabled.