McDATA OPENconnectors, Command Line Interface Manual

Page: 116 / 170

2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300 2-84
VKRZVHFXULW\SRUW%LQGLQJ
6\QWD[
portBinding
3XUSRVH
This command shows the port binding configuration for all ports.
3DUDPHWHUV
This command has no parameters.
&RPPDQG([DPSOH
Root> show security portBinding
2XWSXW
The port binding configuration data is displayed as a table that
includes the following properties.
2XWSXW([DPSOH
The output from the show.security.portBinding command displays as
follows.
Port WWN Binding Bound WWN
---- ----------- -----------------------
0 Active AA:00:AA:00:AA:00:AA:00
1 Inactive 00:00:00:00:00:00:00:00
2 Inactive CC:33:44:55:CC:33:44:55
3 Active 00:00:00:00:00:00:00:00
4 Inactive 00:00:00:00:00:00:00:00
5 Inactive 00:00:00:00:00:00:00:00
6 Inactive 00:00:00:00:00:00:00:00
7 Inactive 00:00:00:00:00:00:00:00
8 Inactive 00:00:00:00:00:00:00:00
9 Inactive 00:00:00:00:00:00:00:00
10 Inactive 00:00:00:00:00:00:00:00
11 Inactive 00:00:00:00:00:00:00:00
12 Inactive 00:00:00:00:00:00:00:00
13 Inactive 00:00:00:00:00:00:00:00
14 Inactive 00:00:00:00:00:00:00:00
15 Inactive 00:00:00:00:00:00:00:00
Port The port number.
WWN Binding The state of port binding for the specified port
(active or inactive).
Bound WWN The WWN of the device that is bound to the
specified port. If this field is blank, no device is
bound to the specified port.