McCall Refrigeration / 81 West Holly Street / Parsons, TN 38363
Phone (731) 847-5570 / Fax (731) 847-9012 / 1-888-REACH-IN (1-888-732-2446) / www.mccallrefrigeration.com
January 2007 / Printed in U.S.A.
W
IDE
B
ODY
R
EACH
-I
N
F
REEZERS
SPECIFICATIONS
Cabinet
- Cabinets are all metal, inside and out. The
top, back, and bottom are made of galvanized steel.
In addition, all seams are closed and sealed, with
metal edges turned away from the exposed surface.
The result is an integrated structural frame. Internal
corners are coved to conform to NSF standards.
Automatic interior lighting is controlled by a light
switch concealed in the door hinge.
Doors
- Constructed of metal, refrigerator doors are
self-closing and fully insulated. Their cam-lift hinges
are chrome-plated and self-lubricating. Hinges also
have a safety stop that holds the door open,
preventing overswing. Chrome-plated pull handles
have built-in cylinder locks. The full-perimeter,
magnetic vinyl gaskets are removable without the
use of tools. Doors easily lift off, and door perimeters
have a built-in, low wattage, and anti-condensate
heater. Door openings are protected by an impact-
resistant, nonconductive PVC breaker strip with no
exposed screws or fasteners.
Insulation
- Cabinet body, doors, and evaporator coil
housings are filled with pressure-injected
polyurethane foam.
Interior Shelves
- Three wire shelves per section are
standard. Shelves have a runner spaced 3/4 inch
O.C. with two reinforcing bars 8 1/2 inch O.C. Coated
with 7 mils of baked-on gray epoxy. The shelves
have a saline spray corrosion resistance of 600
hours. Shelves will support 250 pounds each with
maximum cabinet load of 800 lbs. They are
supported on stainless steel pilasters, and are
adjustable on 1 inch centers. All three shelves are
interchangeable and can be adjusted without tools or
special parts.
Self-Contained Refrigeration
- The complete
refrigeration assembly is mounted on top of the
cabinet behind a removable hatch cover.
Refrigeration components include a hermetically
sealed compressor, thermostatic expansion valve,
thermostatic temperature control, high-humidity
evaporator coil and hot gas condensate evaporator.
The system is balanced to maintain 0°F average
internal air temperature. Windrunner gradient air
displacement process provides even air flow and
temperature control throughout the cabinet. All
components are factory installed and tested, and
supplied with an attached cord and plug, master
power switch, and exterior digital thermometer
(1000 series) dial thermometer (2000-4000 series).
Remote Cabinets
- Standard remote units are
provided with capped refrigeration lines, expansion
valve, solenoid valve, electric condensate evaporator,
and temperature control. Condensing unit is not
included. All other features are the same as self-
contained units, except power cord.
Approval :
1-1024F
McCall Refrigeration specification sheets are available
online @ www.mccallrefrigeration.com
AIA #
ITEM #
MODEL #
PROJECT NAME
SIS #
Model 1-1024F
Stainless steel cabinet interior and exterior front, sides and doors.
Standard Features
• Top mounted compressor and evaporator coil
• Expansion valve
• Hot gas condensate evaporator
• R-404A refrigerant
• Cord and plug attached (self-contained only)
• Windrunner gradient air displacement process
• Exterior digital thermometer (1000 series) dial thermometer (2000-4000 series)
• Self-closing cam-lift hinges
• Chrome-plated door handles with security locks
• 6 inch adjustable legs
• Baked epoxy-coated shelves adjustable on 1 inch centers
• Concealed light switch
• Stainless steel pilasters (1000 series) & aluminum pilasters (2000-4000 series)
• Automatic defrost
• Adjustable doorstops
CLASSIFIED TO
NSF (STD-7-1999)
