McAfee GroupShield 7.0 ForMicrosoft Exchange, User Manual, Page: 80 / 180

80
McAfee
®
GroupShield
™
7.0 User Guide Integrating with ProtectionPilot 1.5
Configuring GroupShield policies
7
Adding McAfee GroupShield for Exchange NAP file to the
ProtectionPilot server:
1 Locate the NAP file, on the product CD or in the installation .ZIP file downloaded
from the McAfee website, and save it to a temporary folder accessible from the
ProtectionPilot server.
2 Log on to the ProtectionPilot server with administrative rights.
3 From the
Server
page, select the
Repository
tab. In
Management Tasks
, click
Check In
Package
. The
Check in Package
wizard appears.
4 Select
Management NAP
and click
Next
. Browse and select McAfee GroupShield
GSEWIN70.nap file you saved to a temporary folder in Step 1.
5 Click
Finish
to enable ProtectionPilot to load the NAP file.
Deploying McAfee GroupShield using ProtectionPilot server:
1 Select the required
Site
,
Group
or
Computer
in the ProtectionPilot directory and select
the
Tasks
tab.
2 Modify the
Deployment
task to deploy and install McAfee GroupShield for Exchange.
Configuring GroupShield policies
This section explains how you enforce policies from ProtectionPilot. There are two
main steps:
1 Within ProtectionPilot, you select the names of the target computers on the
network and the policies that will apply to those selected computers. The
ProtectionPilot Agent installed on all those target computers and you can set up a
number of different policies that will apply to many individual computers or groups
of computers.
2 You set ProtectionPilot to enforce those policies on computers. The agent
communicates with the server to check for new policies. Each computer then
observes your new policy, ignoring any polices that were previously configured at
GroupShield for Exchange.