McAfee AVDCDE-AA-AA - Active Virus Defense Suite, User Manual, Page: 235 / 344

User’s Guide 235
Updating and Upgrading VirusScan Software
If you would prefer to log this data to a different text file, enter its path
and filename in the text box provided, or click
Browse to locate the file.
The AutoUpdate utility will not generate a text file—it will write only to
an existing file.
6. To minimize the log file size, select the Limit size of log file to checkbox.
Next click to set a size, or enter a value between 10
KB
and 999
KB
. By
default, the AutoUpdate utility limits the file size to 100
KB
.
If you clear this checkbox, the log file can grow until disk space or file
system limitations stop it. When the file reaches the maximum size you
set, the AutoUpdate utility first clears it, then starts the log again from
where it left off.
To see the contents of the log file from VirusScan Console, select the
AutoUpdate task in the task list, then choose
View Activity Log from the
Task menu.
7. Click OK to save your changes and close the Automatic Update dialog
box. Click Cancel to close the dialog box without saving your changes.
Configuring update options
To create a new update site or change the settings for an existing site, click
Add
in the Automatic Update dialog box (see Figure 7-1 on page 232 ), or select a
listed site, then click Edit . Either action will open the Automatic Update
Properties dialog box ( Figure 7-4 ).
Figure 7-4. Automatic Update Properties dialog box -
Update Options page