Instructions for use
GLM KIT
9
3.1
Virtual Terminal assembly
To assemble the Virtual Terminal, proceed as follows:
•
Screw the suction bracket onto the rear part of the Virtual Terminal using the supplied
screws
•
Fasten the suction bracket onto a clean flat surface. Otherwise, the Virtual Terminal
can detach itself and fall during operations
Note:
we recommend installing the Virtual Terminal in front of the operator to make
it easier to use during the work cycle.
Figure 4 -
3.5” Virtual Terminal assembly
Summary of Contents for GLM KIT
