MBW 2900280, Manual

Page: 66 / 124

Parts Replacement Cycles and Tolerances
Bearings
Replace anytime a bearing is rough, binding, discolored or removed from housing
or shaft.
Clutch
Replace clutch if it does not disengage below 1800 rpm.
Engine Components
Refer to your engine manufacturer’s Owner’s Manual.
Hardware
Replace any worn or damaged hardware as needed. Replacement hardware
should be grade 5 and zinc plated unless otherwise specified.
Safety Decals
Replace if they become damaged or illegible.
Seals & Gaskets
Replace if a leak is detected and at every overhaul or tear down.
V-Belts
Replace if cracked, torn, or stretched to the point the belt won’t tension properly.
Exciter Oil
Replace once every season or every 250 hours.
- 20 -