54
SMARTING User Manual
– Release 11/03/2019
appears, please return to the main window and re-enter the signal display
window (A34, Figure 8.16).
Upon entering the signal display window, click on the recording button (A42,
Figure 8.18).
Please read carefully whether the presentation is enabled, in
the recording preview window (Figure 8.21, under section
events included
).
After selecting “OK” in the recording preview window, return to the
Presentation application and run the experiment.
Upon experiment completion, return to the SMARTING application and cease
the recording (the information about recorded events will be presented in
the recording summary window – Figure 8.23).
8.7 Disconnecting the Amplifier
In order to disconnect the amplifier from the application click the round
button (A47 in Figure 8.25).
Figure 8.25
Disconnecting the amplifier from the SMARTING android application
When the disconnect button (A47) is pressed, the user is asked to confirm
the disconnection of the device (Figure 8.26). Click the
OK
button to finally
disconnect.