30
SMARTING User Manual
– Release 11/03/2019
6.9 Closing the
Signal display
window and disconnecting the amplifier
To close the display window, simply click
hide signals
button in the main
window, or close the
Signal display
window by clicking the
x
button in the top
right corner.
When the measurement is finished, click the
disconnect
button in the upper
left corner of the streamer’s main window (Figure 6.4) to put the device in
idle mode.
6.10 Software update
Once the updated version of the streamer is available, Smarting Streamer will
notify the user.
If the new update contains major modification, the update notifications will
pop-up prior to entering the streamer (as shown in Figure 6.18). The user will
be asked to choose one of the following options:
update the streamer;
get the new notification in 7 days;
To ignore the current update (by choosing the option never in
Figure 6.18), or
To cancel the notification and receive the update notification next
time when the streamer starts.
Figure 6.18
The
update notification
window