Page 26
Stand 12/2002
Operating Manual
FA 66 - ME ENG
Alterations reserved
5.5
Collecting table
The signatures are transported
onto the collecting table 2 around
the deflector drum 1.
Set the sheet stop 3 in accordance
to the width of product:
loosen both clamping levers 4 and
read off the measures at scale 5.
The inclination of the collecting
table 2 can be altered for various
product conditions:
loosen both locking bolts 6.
5.6
Knock-up table
Loosen the clamping lever 7 and set
table 8 into horizontal position.
Height adjustments at 9.
