Page 20
Stand 12/2002
Operating Manual
FA 66 - ME ENG
Alterations reserved
5.2
Infeed table
5.2.1
Infeed tapes
The products coming from the folding
machine are taken over by the round
belts 1.
Positioning on tape rollers 2 and 3:
loosen the screw 4 and move
the guide 5.
Set the distance between the
upper and lower round belts for
exact transportation:
remove guard 6, loosen screws
with nuts 7 and adjust
the tape rollers 2 or 8.
Please bear in mind that they must
be equal at both sides ! Refasten the
nuts 7 and replace guard 6.
>DANGER< For these works it is
absolutely imperative to push the
EMERGENCY STOP switch or turn
OFF the main switch!
Risk of injury!
