4
QUICK START GUIDE – Wi-Fi Network
If your boat has a Wi-Fi network connected
to the internet
, follow the steps below. (The
complete installation guide and owner’s manual
is available at
www.mbc-marine.com
.)
1. Register a user account at the
remote.
mbc-marine.com
portal.
2. Connect the DISPLAY socket to the
touchscreen and theUNITsocket to the
main electric board of the A/C unit. Power
up the A/C – the touchscreen should turn
on with a beep.
3. Connect to the Wi-Fi
network “SmartTouchXX”
using your mobile phone
or laptop. The XX ending
of the network name
refers to the last two letters
of the unique ID of the
device (refer to the sticker
on the unit – see
picture 1
). Type “smarttouch.
local” into the browser’s address bar (or
scan the QR code on the right). Now you
should see the home screen of the remote
controller.
4. Click “DETAILS” at the bottom, then
“SETTINGS” and then “WIFI/GSM SETTINGS”.
Now you should see the WIFI/GSM SETTINGS
screen in
picture a1
. Enter the Wi-Fi SSID
and PASSWORD (1: name and 2: password
of the Wi-Fi network). Set the “PORTAL” (3)
and “LOCAL” (4) menus to “WIFI”. Click on
the „APPLY” (5) button.
5.
DISCONNECT
from the SmartTouchXX
Wi-Fi and connect to the “regular” internet
on your mobile phone or computer. If the
settings are correct, green, and yellow
connector lights will both turn ON.
6. Open the
remote.mbc-marine.com
portal
and log in to your account created in step
1. As it will be your first SmartTouchRemote
device, you will land on the page to add
a new device
(picture a2)
.
7. Click on the “ADDNEW”(1) button and enter
the unique ID of the device. If all the above
steps worked, the remote controller will be
connected to your account and immediately
ready for use. From now on you can access it
using the
remote.mbc-marine.com
portal.
