MBAS Discman 2, Operating Manual, Page: 17 / 23

Discman 2 / 230 V 39
6 Shut-down and disposal
Risk of injury!
Disconnect the machine from the mains supply or any external drive prior to shutting down and dismantling. Use
only suitable tools for dismantling.
When shutting down the machine dismantle and dispose of all machine parts properly. Clean all oily and
greasy components prior to disposal.
Oil and grease should never be allowed to pollute the environment.
Ensure that all disposal regulations specific to your country are adhered to!

Dismantle the machine properly into its individual components.
 Clean oily and greasy components.

Dispose of components by material group (steel, plastic, electrical and electronic components, etc.).
 Dispose of oil and grease in an environmentally friendly manner.
14 55-100-680 Base edge tuning attachment
20-105-152 Motor 230 V / 50 Hz
Item
No.
Part number Designation Notes