Vehicles that have premium
sound systems will often
have separate tweeters in
a dash or door location.
Try to use this location for
mounting the component
tweeter if possible.
If there is not a suitable
factory location for the
tweeter to be mounted,
custom mounting may be
necessary. Before making
any permanent changes to
your vehicle make sure there
is adequate mounting depth.
A 1-5/8” (47mm) hole is
required for fl ush mounting
Factory location
Custom location
Mounting style
B
C
A
Installation
There are three primary
ways the tweeter can be
mounted. Surface, Flush and
Angled mounting. Make sure
to check for any obstructions
before cutting into any panel.
CAUTION
Always consider consulting a professional audio installer
before installing new speakers. Many car manufacturers
locate speakers behind interior panels that require special
tools to remove those panels to access the speakers. Some
panels will be screwed in, some will use plastic fasteners,
many will have both. Be careful and take your time.
If you are using the speaker wire supplied with your new
speakers make sure that you run the speaker wires through
the factory boot. Do not let speaker wire make contact with
metal edges of doors or other access holes.
Angle Mount
Flush Mount
Surface Mount
