background image

2

Thanks for choosing MB QUART! The UTV-Tuned Add-On 10” Subwoofer with 400 Watt Amplifier for 

applicable Can-Am Maverick X3 vehicles (2017 and up) is engineered for your vehicle. Installation following 

these instructions can be completed in about 2 hours when you have a Stage 2, 3 or 5 MB Quart system for 

Can-Am X3 already installed.

 INSTALLATION OVERVIEW VIDEO 

 

Many of our vehicle-specific products feature 

a “how to” install video with additional details 

on making your installation successful. 

Where available, locate your specific video 

on the website. Type your model number 

(MBQX-SUB-2) into the search box, then click 

on the INSTALL & SUPPORT tab.

WHAT’S INCLUDED

As you unpackage the MBQX-STG3-1 system, account for all components before attempting installation. 

Please note Stage 3 and 5 MB Quart Can-Am UTV-tuned systems will require an accessory amplifier plate.

    What’s In The Box?  

    ● Compact Mono, Class D 400 Watt Subwoofer Amplifier 

    ● One Under-Seat Vehicle-Specific 10” Subwoofer with Mounting Brackets and Aluminum Spacers

    

NOTE FOR STAGE 3 and 5 SYSTEMS

 – 

An optional second subwoofer amplifier 

mounting plate (MBQX-SUB-ACC-1) for Stage 3 or 5 Systems already containing one 

subwoofer and 400 watt amplifier is available at MBQuart.com. This accessory item is 

required for the amplifier in this kit because the dual amplifier mounting plate installed 

in Stage 3 and 5 systems is already populated with two amplifiers and contains one 

subwoofer. Instructions on this accessory mounting plate and how to install this kit as a 

“SUB 2” add-on are included in this manual.

NOTE FOR HARDWARE - 

Hardware for mounting components to enclosures and other installation-related 

items you will need are contained within the packaging for each piece. Do not dispose of any packaging until 

you have completely installed your system and are certain you have accounted for every piece.  If you feel 

something is missing, please contact Maxxsonics directly via email – [email protected]

WARRANTY

Your audio system is covered by a 1 year warranty from the date of invoice. It is important to retain your 

sales receipt. Furthermore, it is crucial that you record and store a record of the serial numbers for each of 

the components that are included in your system. In the rare instance that a warranty claim is needed both 

proof of purchase and serial numbers are required. Additional information on the back page. 

TECHNICAL SUPPORT

For additional technical information, go to the “SUPPORT” tab at MBQUART.com. There you will find helpful, 

FAQ, TEQ Tips and you can contact Technical Support via email.

INTRODUCTION

MBQX-SUB-

ACC-1

Summary of Contents for MBQX-STG3-1



















Reviews: