Sealed enclosures offer a range of performance
profiles depending on the internal air volume.
Larger enclosures will have a smoother more
extended response while a small enclosure
will have increased output in a more focused
frequency range. Sealed enclosures are the
simplest to construct but do require that the box
be completely air tight.
•
Use 3/4” MDF
•
Make sure the woofer mounting panel is
full width and height
•
Glue all mating surfaces
•
Use wood screws
•
Use silicone caulk on all internal joints
The internal volume of the
enclosure must be determined
to insure proper performance.
Simply measure height, width and
depth of enclosure you intend
to build. Subtract the material
thickness. Multiply these numbers
and divide by 1728 to get the
volume in cubic feet.
For enclosures with an angled
panel, measure the larger and
smaller depths, add these
together and divide by two. Use
this averaged depth.
Enclosure
Volume
D
H x W x D
1728
D1 + D2
2
Sealed
Enclosure types
Volume calculation
Subwoofer dimensions
CAUTION
Always consider consulting a professional audio installer
before installing new subwoofers. High power audio
systems have the ability create sound levels above 130dB.
Extended exposure to high sound pressure levels can
cause hearing damage.
Always run any new wiring through safe areas that wont
interfere with the normal operation of the vehicle.
Congratulations on your choice of a MB Quart subwoofer.
This “Quick Start Installation” guide is meant to help you
“hook up” and play music. For more detailed information
on system setting, speaker and subwoofer configuration,
and full specifications by model, visit the website at
MBQuart.com
It’s a good idea to confirm that you have purchased the
correct size subwoofers to fit your vehicle. If you have any
reservations about being able to complete the installation
yourself, we recommend contacting a professional. Be careful
as you go. Always disconnect the negative battery terminal
before starting any electrical work on the vehicle.
FW1-254 FW1-304
Height
13.5”
13.5”
Width
13.5”
13.5”
Depth
10.5”
13.5”
Vb
0.70 ft
3
0.91 ft
3
F3
52.33
48.23
Qtc
1.006
1.151
Before you start
Sealed
Recommended enclosures
Enclosure construction
in(cm)
A
B
C
D
FW1-254
10.09”(25.6) 4.94”(12.54) 9.1”(23.1)
5.6”(14.4)
FW1-304
12.19”(30.9) 5.59”(13.53) 11.00”(28)
6.3”(16)
A
B
D
C
Vented
Vented designs are NOT recommended. This
subwoofer is designed to perform in small
sealed enclosures.
