MB Connect Line mbNET.rokey RKH 210, Manual

Page: 53 / 324

22.2 Description of buttons, icons and fields
Here, you will find an overview of the display elements, input/selection fields and buttons.
Symbol Description
Display element- greyLED
example: a link is inactive, a cable or USB device is not connected, Output1 is inactive
etc.
Display element- greenLED
example: a link is active, a cable or USB device is connected, Output1 is active etc.
Display element- redLED
example: inactive connection, WAN cable is not plugged in, etc.
Checkbox for enabling/disabling the associated function.
Input field for manual input of information/values.
Selection field/Drop-down list to select a predefined value/parameter.
The Editbutton can be used to change input/values in an element/row.
Button for adding a new element (e.g. a new rule in the security settings or new VPN con-
nection)
An element/row is deleted by clicking the Deletebutton.
Clicking on the "Save” button temporarily saves the current entries/changes. However,
the changes are not active.
Clicking on the "Close” button discards the current input/changes.
N O T I C E
Temporary stored settings/changes are saved until a reboot of the router.
Only after you confirm via “Apply Changes", will the changes be applied (activated) and stored permanently.
Clicking on the “Save changes” button will apply all stored settings/changes and store
them permanently on the router.
The "Discard changes ”button will reset/discard all temporarily stored settings/changes.
Classic router - configuring the mbNET via the web interface | Page 53 of 324