MB Connect Line mbNET.rokey RKH 210, Manual

Page: 11 / 324

2 Release note
Version Date Comments
V 6.0.6 Apr 11 th , 2019 Start-Version
V 6.0.8 Jun 19 th , 2019 Add connection and termination examples for serial interfaces in RS 485
2- and 4-wire operation. See Chapter:
"Pin assignment serial interfaces COM1/COM2 (front of device)"
Note on "Last error message" when the red Stat LED lights up.
See Chapter:
"Front view of the device"
Add the description for the menu "IO-Manager".
See chapter:
"IO-Manager"
V 6.1.0 Oct 1 st , 2019 Note on the function SIMPLY.connect in the chapters
•
"General > Validity"
•
"Display, controls and connectors" > "Front view of the device"
The chapter " "Maintenance" " has been added, with the remark to check at
regular in-tervals the actuality of the firmware installed on the device.
V 6.1.1 Dec 5 th , 2019 As of FW 6.1.1, the mbNET can function both as an NTP client and as an
NTP server. See
"System > Settings > NTP Settings"
V 6.1.2 Mar. 11 th , 2020 Correction of the current consumption: old = 1300 mA => new = 500 mA
Add the performance data for new LTE module, for devices with hardware
version HW04.
V 6.1.3 Apr 22 nd , 2020 Add the processor performance data in the technical data.
V 6.1.4 July 6 th , 2020 Add the transmission power of radio modules in the technical data.
V 6.2.0 Oct 19 th , 2020 General revision
Additions to the menu: Extras > IoT (mbEDGE)
V 6.2 DR01 Mar 17 th , 2021 General corrections, update / change of the encryption algorithms.
V 6.3.0 Nov 16 th , 2011 Revision of the device web interface
V 6.3.1 Mar 28 th , 2022 Addition of the chapter "Disposal of old devices"
Update of the chapter "Technical Data"; "Scope of Supply"
Release note | Page 11 of 324