Page 72 of 226
Version: 3.3.5
– DR05 – 23.03.2017
Settings for connecting two industrial routers
– PPTP – server
12.7.1
Note
: Not possible with
mbNET
variant with WLAN (FW 4.1)
If you wish to use other addresses,
set the "
Autoconfig
" option to
NO
and you will see the
picture on the right:
□
From the home page navigation
bar on the left, click
VPN
and on the navigation bar at
the top click
PPTP
.
□
This will display the screen below.
If you now set the
“
Enable
” box and save this setting, your server is live. It will then provide dial-in clients with
addresses from its local network and use its LAN address as the PPTP server address.
