Page 198 of 226
Version: 3.3.5
– DR05 – 23.03.2017
22.
Status messages
General
22.1
The industrial router must be analyzed using certain status information when errors occur. For example, a flashing
ERROR LED indicates that a system error has occurred on the router. The cause of the error can be determined e.g.
via
Status
–
System
using the list.
The various status displays are described below:
Status
– Interfaces
22.2
Label
Description
WAN
Shows the settings at the router
’s WAN connection (external connection). The IP address is
displayed as soon as the router has a physical connection to the network or is assigned a
static IP address. The number of data packets received and transmitted is displayed.
WLAN
Note
: Only at mb
NET
variants with WLAN.
Shows the settings at the router
’s LAN connection (local connection). The IP address is dis-
played when the router has a physical connection. The number of data packets received and
transmitted is displayed.
LAN
Shows the settings at the router
’s LAN connection (local connection). The IP address is dis-
played when the router has a physical connection. The number of data packets received and
transmitted is displayed.
